Convert anything or everything into coin operated, bill operated, card operated.

Weavefuture Inc. Logo English French Spanish Dutch German Greek Italian Portuguese Japanese Russian Korean http://www.KioskPortals.com
Home | Up | Water Vending Board | electric water valve | Water dispenser | Water Vending Control Board | coin_acceptor_timer_control_board_Instructions | Car Wash Setup for Water Dispenser Timer Board. Check the Weavefuture Water Dispenser Timer Board for more information.

The other Car Wash Timer Board, you have to check their manual

Weavefuture Water Vending Controller Interface Board

The board will accept any pulse output coin acceptor or bill acceptor, for example Multi Coin Acceptor AC5 will output pulse signal to Water Vending Control Board. The Coin Op Timer Control board will control the Water valve device on/off for a period of time.

The AC5 coin acceptor can recognize up to 5 types of coins

Coin Op Timer Control Board setting.

Coin opearated Water dispenser

 Time Setting Button: This is used to set the time in seconds for money credit to expire when the start button not pressed.

The default is 60 seconds. For example after the customer drop the money the

1.          Set Timer to programmable mode:

Press and hold the Timer Setting Button for 3 seconds or more. The Display will show the previous setting,

(As shown in Picture: Display is number 8, means 8 seconds)

2.          Change previous setting:

Press the Timer Setting Button for 1 second, the Display number will increase by 1. The number goes up by 1 seconds each time. Once it reaches 120 seconds, it will reset back to 1 seconds by one more press.

3.          Change back to working mode:

Once Steps 1 and 2 are done, Press and hold the Timer Setting Button for 3 seconds or more. The display will show the desirable setting

 

Time Minutes Button: This is used to set the minutes that active the water valve to let water run.

The default is 0 seconds.

4.          Set Timer to programmable mode:

Press and hold the Timer Minutes Button for 3 seconds or more. The Display will show the previous setting,

(As shown in Picture: Display is number 8, means 8 minutes)

5.          Change previous setting:

Press the Timer Minutes Button for 1 second, the Display number will increase by 1. The number goes up by 1 minute each time. Once it reaches 60 minutes, it will reset back to 1 minute by one more press.

6.          Change back to working mode:

Once Steps 1 and 2 are done, Press and hold the Timer Minutes Button for 3 seconds or more. The display will show the desirable setting

 

Time Seconds Button: This is used to set the seconds that active the water valve to let water run.

The default is 0 seconds.

7.          Set Timer to programmable mode:

Press and hold the Timer Seconds button for 3 seconds or more. The Display will show the previous setting,

(As shown in Picture: Display is number 8, means 8 minutes)

8.          Change previous setting:

Press the Timer Seconds Button for 1 second, the Display number will increase by 1. The number goes up by 1 second each time. Once it reaches 60 seconds, it will reset back to 1 second by one more press.

9.          Change back to working mode:

Once Steps 1 and 2 are done, Press and hold the Timer Seconds Button for 3 seconds or more. The display will show the desirable setting

 

Time Seconds Button: This is used to set the seconds that active the water valve to let water run.

The default is 0 seconds.

10.       Set Timer to programmable mode:

Press and hold the Timer Seconds button for 3 seconds or more. The Display will show the previous setting,

(As shown in Picture: Display is number 8, means 8 minutes)

11.       Change previous setting:

Press the Timer Seconds Button for 1 second, the Display number will increase by 1. The number goes up by 1 second each time. Once it reaches 60 seconds, it will reset back to 1 second by one more press.

12.       Change back to working mode:

Once Steps 1 and 2 are done, Press and hold the Timer Seconds Button for 3 seconds or more. The display will show the desirable setting

 Time Clear Button: This is used to clear the time that of the water valve opening and close the water valve.

?